Pro free for 30 days.No card.Start free →

Inventory Control Basics and Reorder Points for Small Business

A plain guide to inventory control for small businesses: how to count and record stock, rank items, calculate a reorder point with safety stock, size orders with a simple formula, and keep tax basics in view.

By WorkBOS Content Desk7 min read
Tall warehouse shelving racks holding stock on pallets (Photo by emkanicepic on Pixabay)
Photo: emkanicepic / Pixabay

Running out of a best-selling item loses sales and sometimes customers. Over-ordering ties up cash in boxes that sit on a shelf. Most small businesses swing between the two because stock decisions are made by feel: "we seem low, let's order."

Inventory control replaces feel with a few simple rules: know what you have, know how fast it sells, know how long the supplier takes, and order when stock reaches a set level. This guide covers the basics, including how to calculate a reorder point, with worked examples you can adapt in a spreadsheet.

What inventory control means

Inventory control is the routine of counting, recording and replenishing stock so you can meet orders on time without carrying more than you need. For a shop, that is products. For a service business such as a cleaner or a caterer, it is supplies: chemicals, packaging, parts.

The two costs you are balancing

Virginia Tech's extension guide on inventory control breaks total inventory cost into the purchase cost, the holding cost (storage, insurance, handling, and obsolescence) and the setup cost of placing each order. Ordering often raises setup costs; ordering in big batches raises holding costs. Good control finds the middle.

Step 1: Know what you actually have

You cannot set rules for numbers you do not trust. Start with a count.

Run a physical count

Count every item once and write the quantities in one sheet with a clear item name or code. Do it at a quiet time, with two people if you can, and note where each item is stored.

Keep a running record

After the first count, log every receipt and every sale or use as it happens. Accounting guidance from SCORE calls this a perpetual record, because quantities stay current instead of being rebuilt once a year. In a spreadsheet, that is three columns: received, used, and balance.

Check between full counts

A full count once a year is not enough. Count a small group of items each week or month, a method often called a cycle count, and compare to the record. Investigate every difference. Small gaps point to damage, mis-picks, theft or data entry errors.

Step 2: Sort what matters most

You do not need the same attention for every item. Rank items by how much money they represent per year (price times units sold).

| Group | Typical share of items | Treatment | |---|---|---| | A: top earners | Few items | Count often, order carefully, keep a backup supplier | | B: middle | Some items | Review monthly | | C: low value | Many items | Simple min and max levels, order in bulk |

This is sometimes called ABC analysis. The point is to focus your counting time on the A items, where a mistake costs the most.

Step 3: Calculate your reorder point

The reorder point is the stock level that triggers a new order. The Virginia Tech guide gives the basic formula:

Reorder point = (daily demand x supplier lead time in days) + safety stock

Lead time is the delay between placing the order and receiving it. Safety stock is a cushion in case an order arrives late or demand is higher than usual.

A worked example

A shop sells about 12 jars of a sauce per day. The supplier takes 7 days to deliver. The owner wants a cushion of 3 days of sales, or 36 jars.

  • Demand during lead time: 12 x 7 = 84 jars
  • Safety stock: 36 jars
  • Reorder point: 84 + 36 = 120 jars

When the count drops to 120, place an order. If the supplier arrives on time, stock lands at roughly 36 jars, your cushion.

Setting safety stock

Safety stock exists because both demand and delivery times vary. North Carolina State University's supply chain program explains that the amount depends on demand variability, lead time variability and the service level you want, where a higher target lowers the chance of a stockout but raises average inventory. It lists typical multipliers of about 1.29 for a 90 percent service level, 1.65 for 95 percent, and 2.33 for 99 percent. You do not need statistics on day one. A practical start:

  1. Look at the last 8 to 12 weeks of sales.
  2. Note your worst week and your average week.
  3. Note your slowest and average supplier deliveries.
  4. Set safety stock to cover the gap between average and bad, then adjust.

The extension guide notes that management often sets safety stock directly, and that more safety stock means higher holding costs. Be generous on critical items and lean on cheap, easy-to-replace ones. Our cash flow forecast guide explains how big stock orders land on your cash position.

Step 4: Decide how much to order

Once the trigger is set, choose the quantity. The same Virginia Tech guide presents the economic order quantity (EOQ), the batch size that minimizes combined ordering and holding cost:

EOQ = square root of (2 x annual demand x cost per order / holding cost per unit per year)

Example: you sell 1,200 units a year, each order costs $30 to place and receive, and holding one unit for a year costs $2.

  • 2 x 1,200 x 30 = 72,000
  • 72,000 / 2 = 36,000
  • Square root of 36,000 is about 190

So order around 190 units, about six times a year. The formula assumes steady demand, so treat it as a starting point and round to the supplier's case size or minimum order.

Step 5: Know the tax and accounting basics

If making, buying or selling goods is a main source of your income, IRS Publication 538 says you generally need to keep an inventory to show income clearly, and you value it at the start and end of each tax year. The same IRS publication says businesses that meet the small business gross receipts test can follow simpler rules, and it describes the first-in first-out and last-in first-out ways of identifying which items were sold. Which method and test apply to you is a question for your accountant. This is general information, not professional tax advice. Our guide to record keeping covers how long to hold count sheets and supplier invoices.

A weekly stock routine

Use this as a checklist:

  1. Update receipts and sales in the stock sheet.
  2. Check every item against its reorder point.
  3. Place orders for anything at or below it.
  4. Count the week's cycle-count group and fix differences.
  5. List slow-moving items that have not sold in 90 days.
  6. Review open orders and chase anything late.

Slow-moving stock is its own risk. SCORE's inventory brief notes that it ties up working capital, and recommends setting aside a reserve for items that may need to be scrapped. Discount or bundle slow items before they age out.

Common mistakes

  • Using last year's averages for a changing business. Update demand figures every quarter.
  • Ignoring lead time. A reorder point without lead time is a guess.
  • Counting only once a year. Errors compound all year.
  • Treating every item the same. Spend your time on the A items.
  • Safety stock that never gets reviewed. If the supplier improves or demand shifts, the cushion should change too.
  • Forgetting supply risk. One supplier for a key item is a single point of failure. See our supplier management guide.

Where WorkBOS fits

WorkBOS is not a dedicated inventory or warehouse system, so if you carry hundreds of stocked items with barcodes, use a stock tool built for that. What it can do is the work around the stock: automations can create a reorder task when you update a sheet, projects and tasks keep supplier follow-ups visible, and invoicing and basic accounting keep sales and costs in one place. The docs show how those pieces connect, and pricing lists plans from a free tier.

Frequently asked questions

Q: What is a reorder point in simple terms? A: It is the stock level at which you place a new order, set so that stock lasts until the delivery arrives. The basic formula is daily demand times supplier lead time, plus safety stock.

Q: How much safety stock do I need? A: It depends on how much your demand and supplier delivery times vary and how bad a stockout would be. Start by covering the gap between your average week and your worst recent week, then adjust.

Q: How often should I count inventory? A: Record every movement as it happens, count small groups of items weekly or monthly, and do a full count at least once a year, which is also when most owners need a year-end figure.

Q: Do I have to keep inventory for tax purposes? A: If goods are a main source of your income, the IRS generally expects an inventory, though smaller businesses may qualify for simpler treatment. Ask your accountant which applies.

Q: Is the EOQ formula worth using? A: Yes as a sanity check on order size, but demand is rarely steady, so adjust for supplier minimums, discounts and shelf life.

Sources are linked in the text above: Virginia Cooperative Extension (Virginia Tech), NC State University Supply Chain Resource Cooperative, IRS Publication 538; SCORE's inventory accounting brief informed the counting practices.

Run it all from one place

Projects, clients, finance, people and AI employees in one system. Start free, no card needed.

Start free →